Dead Sea Mud Shampoo Bars: a cold processed soap recipe for cleansing hair and balancing scalp.
Dead Sea Mud is wildly popular for skin and hair care. Rich in beneficial minerals like magnesium and potassium, this dark, salty mud can be used as a deep cleansing mask or added to a wide range of formulations for facial, body, and hair care. The following recipe for Dead Sea Mud Shampoo Bars combines the fortifying minerals of Dead Sea Mud with a moisturizing blend of conditioning fats including argan, jojoba, and shea.
Silk powder has also been added to contribute a soft and silky slip to the soap’s lather. Black castor oil helps to boost that lather a bit while doubling down on conditioning benefits. Refreshing spearmint and rosemary essential oils finish the bar off with an all-natural, spa-inspired scent.
While our Dead Sea Mud Shampoo Bar recipe was formulated with hair care in mind, it can certainly be used as a body bar as well. Try swapping the essential oils for your own custom blend to make this formula your own. Citrus or wood oils would be particularly nice choices to compliment the earthy tone of this gorgeous cold processed soap.
Have you experimented with Dead Sea Mud in your own soap formulations? We’d love to hear about your experiences working with this unique ingredient! Share your soap making story in the comments below, and be sure to include a link to your shop or web site so that we can share your work!
Dead Sea Mud Shampoo Bars
Makes about six 4-ounce bars
3.2 ounces (91 grams) Sodium Hydroxide/Lye
- Start by measuring all of your ingredients individually using an accurate scale. Be sure and take the proper safety precautions when measuring, handling, and working with lye. For more information on prep-work for soaping, check out our Cold Process Method post.
- In a heavy-duty plastic pitcher or stainless steel pot, slowly add your lye to your water, mixing slowly until all lye has dissolved. Set the mixture aside to cool. Use a thermometer to keep an eye on the temperature. Ideally the lye water will cool to 100 F around the same time that the oils reach the same temperature.
- Gently heat the solid oils and butters until fully melted. Add the remaining oils, vitamin E, and silk powder. Mix, and let sit until the mixture cools to 100 F degrees.
- When both the lye water and oil mixture reach about 100 F add the oil mixture to the soap pot followed the lye water. Immediately begin stirring the mixture with a large whisk or stick blender. Continue to mix until the mixture begins to trace. The texture should be similar to a custard or pudding, leaving a thick coating on the back of your spatula and a drizzle across the surface of the resting soap.
- At trace, add your Dead Sea Mud and essential oil, then stir or mix well again until the mud and essential oils have been evenly dispersed.
- Carefully transfer the soft soap to lined molds or silicone molds and insulate (we used 2.5 inch round PVC molds). Allow the soap to harden for at least 24 hours before un-molding and slicing. (These bars may take a little longer than usual to harden due to the Dead Sea Mud. If they seem very soft at 24 hours try giving them an extra day or so before slicing.)
- Place the sliced bars of soap on a drying rack and allow them to cure for at least four to six weeks before use.